1963-72 Chevy Truck Trailing Arm Crossmember with Anti Squat Brackets, Coil Spring Suspension

$499.00

Our 1963-72 Chevy truck drop crossmember is specifically designed for Chevy trucks that have a 4" drop or more. Increases ground clearance on your lowered truck. Includes bolt on trailing arms mounts with anti squat provisions up to 4 degrees and are far superior to the welded items on the market. Our crossmember is based on the General Motors design. Bolt on mounts allow for the use of 5 different trailing arm settings. Lower hole is for factory trailing arm position, and is adjustable for up to 4 degrees of anti squat allowing more drive off of corners for better performance. Also allows for harder launches for quicker 0-60 foot times.

Kit includes:

  • Laser cut 1018 steel chassis grade steel, .188" thickness

  • Hoop design eliminates any interference with drive shaft on lowered trucks

  • Bolt in directly to your stock location

  • Works with factory and aftermarket trailing arms

  • Anti squat provisions included

  • Adjustable from OE position up to 4 degrees anti squat adjustment

  • Integrated exhaust passages allow up to 3" exhaust pipes

  • No welding required

  • Includes grade 8 hardware

Notes:

Made in the USA
Designed for use on short wheel-base, one-piece drive line pickups with 4" drop or more. Long bed requires drilling and mounting of OE carrier bearing bracket.
Driveshaft loop measures 4.750" x 7.500"
Uses 3/4"-10-UNC x 4.500" long mounting bolts for trailing arms

What does this fit?

1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevy C10 truck, short bed

Quantity:
Add To Cart

Our 1963-72 Chevy truck drop crossmember is specifically designed for Chevy trucks that have a 4" drop or more. Increases ground clearance on your lowered truck. Includes bolt on trailing arms mounts with anti squat provisions up to 4 degrees and are far superior to the welded items on the market. Our crossmember is based on the General Motors design. Bolt on mounts allow for the use of 5 different trailing arm settings. Lower hole is for factory trailing arm position, and is adjustable for up to 4 degrees of anti squat allowing more drive off of corners for better performance. Also allows for harder launches for quicker 0-60 foot times.

Kit includes:

  • Laser cut 1018 steel chassis grade steel, .188" thickness

  • Hoop design eliminates any interference with drive shaft on lowered trucks

  • Bolt in directly to your stock location

  • Works with factory and aftermarket trailing arms

  • Anti squat provisions included

  • Adjustable from OE position up to 4 degrees anti squat adjustment

  • Integrated exhaust passages allow up to 3" exhaust pipes

  • No welding required

  • Includes grade 8 hardware

Notes:

Made in the USA
Designed for use on short wheel-base, one-piece drive line pickups with 4" drop or more. Long bed requires drilling and mounting of OE carrier bearing bracket.
Driveshaft loop measures 4.750" x 7.500"
Uses 3/4"-10-UNC x 4.500" long mounting bolts for trailing arms

What does this fit?

1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevy C10 truck, short bed

Our 1963-72 Chevy truck drop crossmember is specifically designed for Chevy trucks that have a 4" drop or more. Increases ground clearance on your lowered truck. Includes bolt on trailing arms mounts with anti squat provisions up to 4 degrees and are far superior to the welded items on the market. Our crossmember is based on the General Motors design. Bolt on mounts allow for the use of 5 different trailing arm settings. Lower hole is for factory trailing arm position, and is adjustable for up to 4 degrees of anti squat allowing more drive off of corners for better performance. Also allows for harder launches for quicker 0-60 foot times.

Kit includes:

  • Laser cut 1018 steel chassis grade steel, .188" thickness

  • Hoop design eliminates any interference with drive shaft on lowered trucks

  • Bolt in directly to your stock location

  • Works with factory and aftermarket trailing arms

  • Anti squat provisions included

  • Adjustable from OE position up to 4 degrees anti squat adjustment

  • Integrated exhaust passages allow up to 3" exhaust pipes

  • No welding required

  • Includes grade 8 hardware

Notes:

Made in the USA
Designed for use on short wheel-base, one-piece drive line pickups with 4" drop or more. Long bed requires drilling and mounting of OE carrier bearing bracket.
Driveshaft loop measures 4.750" x 7.500"
Uses 3/4"-10-UNC x 4.500" long mounting bolts for trailing arms

What does this fit?

1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevy C10 truck, short bed

Chevy LS Engine Mount Adapter Kit, Adjustable
$239.00
GM LS Engine Conversion Plate Kit Suit S/B Chev to GM LS Engine Conversions - 4 Position
$169.00
Chevy Truck 12Bolt Posi-Trac 4.11 Diff Upgrade (Special Order)
$2,400.00
Available to Order - Pls enquire
1960-72 Chevy, GMC Truck Rear Axle 4 degree Shims for Coil Spring Rear Suspension
$81.80
GM Transmission Mount, Polyurethane, TH350, TH400, 700R4, 4L60E, Muncie 4 speed
$75.43
Available to Order - Pls enquire