1963-72 Chevy C10, GMC C15 Truck Tubular Upper and Lower Control Arm Set
Our Tubular Upper and Lower control arms for 1963-72 Chevy and GMC trucks offers massively increased strength, reduced weight and greatly improved performance over factory control arms - particularly in lowered/ big wheel applications.
These modern designed Tubular control arms will also correct the camber and ball joint angle problems often found when using a lowered coil spring.
They are also designed with an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and provide increased high speed stability.
These arms come with factory early model cross shafts for ease of installation and increased ground clearance and work with (all) drop spindles.
Requires use of POL sway bar.
Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Hardware
Limited Lifetime Warranty
Sold in sets
Notes:
Coil Spring (of choice) and Shocks sold separately.
Will also fit 1971-72 trucks, with 71-72 upper ball-joint and tie rod kit.
Due to our improved design, these lower arms now require the use of our after market sway bar.
Manufactured in the USA
What does this fit?
1963 1964 1965 1966 1967 1968 1969 1970 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer
Our Tubular Upper and Lower control arms for 1963-72 Chevy and GMC trucks offers massively increased strength, reduced weight and greatly improved performance over factory control arms - particularly in lowered/ big wheel applications.
These modern designed Tubular control arms will also correct the camber and ball joint angle problems often found when using a lowered coil spring.
They are also designed with an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and provide increased high speed stability.
These arms come with factory early model cross shafts for ease of installation and increased ground clearance and work with (all) drop spindles.
Requires use of POL sway bar.
Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Hardware
Limited Lifetime Warranty
Sold in sets
Notes:
Coil Spring (of choice) and Shocks sold separately.
Will also fit 1971-72 trucks, with 71-72 upper ball-joint and tie rod kit.
Due to our improved design, these lower arms now require the use of our after market sway bar.
Manufactured in the USA
What does this fit?
1963 1964 1965 1966 1967 1968 1969 1970 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer
Our Tubular Upper and Lower control arms for 1963-72 Chevy and GMC trucks offers massively increased strength, reduced weight and greatly improved performance over factory control arms - particularly in lowered/ big wheel applications.
These modern designed Tubular control arms will also correct the camber and ball joint angle problems often found when using a lowered coil spring.
They are also designed with an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and provide increased high speed stability.
These arms come with factory early model cross shafts for ease of installation and increased ground clearance and work with (all) drop spindles.
Requires use of POL sway bar.
Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Hardware
Limited Lifetime Warranty
Sold in sets
Notes:
Coil Spring (of choice) and Shocks sold separately.
Will also fit 1971-72 trucks, with 71-72 upper ball-joint and tie rod kit.
Due to our improved design, these lower arms now require the use of our after market sway bar.
Manufactured in the USA
What does this fit?
1963 1964 1965 1966 1967 1968 1969 1970 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer
