55 RALLY ALUMINUM GUNMETAL WITH MACHINE LIP - 20x9.5 6lug

$659.00

*Centre Caps purchased separately

Size: 20X9.50

BP: 6x5.5 Gunmetal Machined Lip

Bore: 108

Offset: 20

Backspace: 6.080

SoldSep

Load Rating: 2400

Tested to SAE J2530 standards

*Depending on application this wheel may require the use of 20mm spacer.

Note: - Purchasers Responsibility

1. Measure the backspacing on your vehicle to ensure correct fitment, without rubbing on the inner or outer body, lower control arms or tie rods

2. Measure the front and rear mounting hub to ensure correct centre bore size.

3. Consult the motor vehicle technical regulations from your local Department of Transport or seek engineering advice regarding the technical regulations in your region.

Add To Cart

*Centre Caps purchased separately

Size: 20X9.50

BP: 6x5.5 Gunmetal Machined Lip

Bore: 108

Offset: 20

Backspace: 6.080

SoldSep

Load Rating: 2400

Tested to SAE J2530 standards

*Depending on application this wheel may require the use of 20mm spacer.

Note: - Purchasers Responsibility

1. Measure the backspacing on your vehicle to ensure correct fitment, without rubbing on the inner or outer body, lower control arms or tie rods

2. Measure the front and rear mounting hub to ensure correct centre bore size.

3. Consult the motor vehicle technical regulations from your local Department of Transport or seek engineering advice regarding the technical regulations in your region.

*Centre Caps purchased separately

Size: 20X9.50

BP: 6x5.5 Gunmetal Machined Lip

Bore: 108

Offset: 20

Backspace: 6.080

SoldSep

Load Rating: 2400

Tested to SAE J2530 standards

*Depending on application this wheel may require the use of 20mm spacer.

Note: - Purchasers Responsibility

1. Measure the backspacing on your vehicle to ensure correct fitment, without rubbing on the inner or outer body, lower control arms or tie rods

2. Measure the front and rear mounting hub to ensure correct centre bore size.

3. Consult the motor vehicle technical regulations from your local Department of Transport or seek engineering advice regarding the technical regulations in your region.