Competition Oil & Transmission Cooler 1/2" NPT, 13-1/2" x 9" x 3-1/2", with Fan
Aeroflow's engine and transmission oil coolers feature 1/2" NPT female fittings, thermostat wiring, plug kit and a high quality electric fan.
It accepts engine oil, transmission and power steering applications and has been pressure tested to over 200psi.
The thermal switch included activates the fan at 175°F/79.5°C. The cooler also features a fin and plate construction. The dimensions are 13.5"(34cm) x 9"(23cm).
All electric fans are fully reversible blades and polarity for mounting either side of the heat exchanger.
They are boxed in the pusher configuration. To change this to a puller fan simply unscrew 10mm nut (reverse (left hand) thread) and turn fan blade over keeping in mind polarity BLUE - Positive BLACK - Negative.
Aeroflow's engine and transmission oil coolers feature 1/2" NPT female fittings, thermostat wiring, plug kit and a high quality electric fan.
It accepts engine oil, transmission and power steering applications and has been pressure tested to over 200psi.
The thermal switch included activates the fan at 175°F/79.5°C. The cooler also features a fin and plate construction. The dimensions are 13.5"(34cm) x 9"(23cm).
All electric fans are fully reversible blades and polarity for mounting either side of the heat exchanger.
They are boxed in the pusher configuration. To change this to a puller fan simply unscrew 10mm nut (reverse (left hand) thread) and turn fan blade over keeping in mind polarity BLUE - Positive BLACK - Negative.
Aeroflow's engine and transmission oil coolers feature 1/2" NPT female fittings, thermostat wiring, plug kit and a high quality electric fan.
It accepts engine oil, transmission and power steering applications and has been pressure tested to over 200psi.
The thermal switch included activates the fan at 175°F/79.5°C. The cooler also features a fin and plate construction. The dimensions are 13.5"(34cm) x 9"(23cm).
All electric fans are fully reversible blades and polarity for mounting either side of the heat exchanger.
They are boxed in the pusher configuration. To change this to a puller fan simply unscrew 10mm nut (reverse (left hand) thread) and turn fan blade over keeping in mind polarity BLUE - Positive BLACK - Negative.