1960-66 Chevy C10, GMC C15 Truck Power Steering Rack and Pinion Kit - LHD

$2,200.00
Available to Order - Pls enquire

New rack and pinion power steering system for your 1960-66 Classic Chevy and GMC truck. Designed to give you the best steering you can have and provide much higher performance, driver comfort and feeback. This kit is designed with correct ackermann and reduced bump steer. Works with any height coil springs and stock or drop spindles. Works great on lowered vehicles using airbags. Can use sway bar without any modifications.

Call To Order

Steering Column Shaft Type - Stock or 3/4, 3/4 - 36 or 1’ DD

Spindle Type - Drum/OEM Disc or >73-87 Type

Kit includes:

  • 1 - Power Rack and Pinion (2-7/8 Turns Lock to Lock)

  • 1 - Rack & Pinion mounting bracket

  • 1 - U-joint for rack & pinion

  • 1 - U-joint for steering column

  • 1 - 3/4" DD steering shaft

  • 2 - Outer Tie rod ends

  • Hardware

  • Limited lifetime warranty

Available upgrades:

  • Big block applications may require additional 3/4DD x 3/4DD ujoint

  • Big block applications may require #SSSB0000 Steering Shaft support Bearing

  • See Suggested items

Notes:

Increased exhaust clearance over stock box
Works with stock or aftermarket steering column.
Works with drum brake or disc brake spindles. Please specify
No chassis modifications needed
For use with OE power steering pumps including Gen 2 type
Will not work with 4wd
Will not work with LS engine with low drivers side alternator or P/S pump

What does this fit?

1960 1961 1962 1963 1964 1965 1966 Chevy C10, GMC C15 truck and Suburban

Get notified by email when this product is in stock.
Add To Cart

New rack and pinion power steering system for your 1960-66 Classic Chevy and GMC truck. Designed to give you the best steering you can have and provide much higher performance, driver comfort and feeback. This kit is designed with correct ackermann and reduced bump steer. Works with any height coil springs and stock or drop spindles. Works great on lowered vehicles using airbags. Can use sway bar without any modifications.

Call To Order

Steering Column Shaft Type - Stock or 3/4, 3/4 - 36 or 1’ DD

Spindle Type - Drum/OEM Disc or >73-87 Type

Kit includes:

  • 1 - Power Rack and Pinion (2-7/8 Turns Lock to Lock)

  • 1 - Rack & Pinion mounting bracket

  • 1 - U-joint for rack & pinion

  • 1 - U-joint for steering column

  • 1 - 3/4" DD steering shaft

  • 2 - Outer Tie rod ends

  • Hardware

  • Limited lifetime warranty

Available upgrades:

  • Big block applications may require additional 3/4DD x 3/4DD ujoint

  • Big block applications may require #SSSB0000 Steering Shaft support Bearing

  • See Suggested items

Notes:

Increased exhaust clearance over stock box
Works with stock or aftermarket steering column.
Works with drum brake or disc brake spindles. Please specify
No chassis modifications needed
For use with OE power steering pumps including Gen 2 type
Will not work with 4wd
Will not work with LS engine with low drivers side alternator or P/S pump

What does this fit?

1960 1961 1962 1963 1964 1965 1966 Chevy C10, GMC C15 truck and Suburban

New rack and pinion power steering system for your 1960-66 Classic Chevy and GMC truck. Designed to give you the best steering you can have and provide much higher performance, driver comfort and feeback. This kit is designed with correct ackermann and reduced bump steer. Works with any height coil springs and stock or drop spindles. Works great on lowered vehicles using airbags. Can use sway bar without any modifications.

Call To Order

Steering Column Shaft Type - Stock or 3/4, 3/4 - 36 or 1’ DD

Spindle Type - Drum/OEM Disc or >73-87 Type

Kit includes:

  • 1 - Power Rack and Pinion (2-7/8 Turns Lock to Lock)

  • 1 - Rack & Pinion mounting bracket

  • 1 - U-joint for rack & pinion

  • 1 - U-joint for steering column

  • 1 - 3/4" DD steering shaft

  • 2 - Outer Tie rod ends

  • Hardware

  • Limited lifetime warranty

Available upgrades:

  • Big block applications may require additional 3/4DD x 3/4DD ujoint

  • Big block applications may require #SSSB0000 Steering Shaft support Bearing

  • See Suggested items

Notes:

Increased exhaust clearance over stock box
Works with stock or aftermarket steering column.
Works with drum brake or disc brake spindles. Please specify
No chassis modifications needed
For use with OE power steering pumps including Gen 2 type
Will not work with 4wd
Will not work with LS engine with low drivers side alternator or P/S pump

What does this fit?

1960 1961 1962 1963 1964 1965 1966 Chevy C10, GMC C15 truck and Suburban

1971-72 Chevy, GMC C10 Truck Tie Rod and Idler Arm Kit For Stock or Tubular Control Arms
$351.25
1963-70 Chevy C10 Truck Upper Ball Joint
$55.00
1963-64 Chevy, GMC C10 Truck Tie Rod and Idler Arm Kit For Stock or Tubular Control Arms
$351.25
1967-72 Chevy C10, GMC C15 Truck Power Steering Rack and Pinion Kit - LHD
$2,200.00
Available to Order - Pls enquire
Power Steering Pump - GM Saginaw
$355.00