1973-87 Chevy C10, GMC C15 Truck Tubular Upper and Lower Control Arm Set
Our Tubular Upper and Lower control arms for 1973-87 Chevy and GMC design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring.
We then designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and provide increased high speed stability.
These arms come with factory early model cross shafts for ease of installation and increased ground clearance.
Works with drop spindles.
Corrects geometry for lowered applications.
Requires use of POL sway bar.
Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Hardware
Limited Lifetime Warranty
Sold in sets
Notes:
Will also fit 1963-72 trucks, if upgrading to later model 1973+ spindle and tie rod kit.
Due to our improved design, these lower arms now require the use of our after market sway bar.
Manufactured in the USA
What does this fit?
1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer
Our Tubular Upper and Lower control arms for 1973-87 Chevy and GMC design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring.
We then designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and provide increased high speed stability.
These arms come with factory early model cross shafts for ease of installation and increased ground clearance.
Works with drop spindles.
Corrects geometry for lowered applications.
Requires use of POL sway bar.
Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Hardware
Limited Lifetime Warranty
Sold in sets
Notes:
Will also fit 1963-72 trucks, if upgrading to later model 1973+ spindle and tie rod kit.
Due to our improved design, these lower arms now require the use of our after market sway bar.
Manufactured in the USA
What does this fit?
1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer
Our Tubular Upper and Lower control arms for 1973-87 Chevy and GMC design helps to correct the camber and ball joint angle problems often found when using a drop spindle or lowered coil spring.
We then designed an extra 2.0 degrees of caster into the arm to make the vehicle drive straight and provide increased high speed stability.
These arms come with factory early model cross shafts for ease of installation and increased ground clearance.
Works with drop spindles.
Corrects geometry for lowered applications.
Requires use of POL sway bar.
Kit includes:
2 upper control arms
2 lower control arms
Gloss Black powder coated
1.250" x .188" DOM tubing
4 cross shafts (installed)
2 lower ball joints (If applicable)
2 upper ball joints (If applicable)
Hardware
Limited Lifetime Warranty
Sold in sets
Notes:
Will also fit 1963-72 trucks, if upgrading to later model 1973+ spindle and tie rod kit.
Due to our improved design, these lower arms now require the use of our after market sway bar.
Manufactured in the USA
What does this fit?
1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 Chevy C10, GMC C15 truck, Suburban and 2wd Blazer
